PagerDuty

Hi! What is the expected paging behavior when you add additional responders to an incident?  My team tested adding additional responders to an incident and found that the additional responders kept getting paged after the incident was marked resolved, and they kept getting paged until they accepted the additional responders request. Is this the expected behavior?   My team is interested in paging additional responders until they accept the additional responders request (even if the page is acknowledged or resolved), but I want to get clarity on the expected behavior before we start relying on this feature. 

We have a lot of services for our organisation. If I call the URL https://api.pagerduty.com/services?limit=100&time_zone=UTC then there are too many and the list is truncated. I have tried thishttps://api.pagerduty.com/services?limit=100&time_zone=UTC&name=*E*and thishttps://api.pagerduty.com/services?limit=100&time_zone=UTC&name=.*E.*but they doesn’t work.This seems like an obvious feature to have, but I do not see it in the reference guide, e.g 

My Rundeck is upgraded to 5.10.  Running on RHEL 9OpenJDK 11.0.25 has a vulnerability and needs to be upgraded.  RHEL stopped support for 11 at .25 so upgraded to 17 and changed the default to 17 which Rundeck shows using 17.I removed OpenJDK 11 from the system but java-11-openjdk-headless remains.  When trying to remove that it wants to remove dependent package … Rundeck.This is a headless install… anyone know how to get Rundeck to move to Java-17-openjdk-headless so I can remove 11?

Isn’t it possible to customize the content of the event text that is sent to a Slack channel ?eg . change the wording, .f.ex add some freestyle text

We implemented PagerDuty Advance in our Slack environment.   It has been a great for our incident channels.   As a manager, the ability to get a quick summarization of an incident is great.    However one side-effect of turning it on, is that we are now getting a lot of noise to our Status/Alert channel.   When an alert is triggered, PagerDuty Advance is adding a bunch of new information into this Slack channel which is not needed within the Status channel.     Before PagerDuty Advance we would get the basic info to the channel (Alert name, Service, Meeting URL)After PagerDuty Advance we now get the above + “What Happened” (useless at time of alert for us) and “Suggested Investigation Path” (also not very helpful for us at the time of the alert)At times this extra information becomes very verbose and clogs up our Status channel.   But I haven’t figured out how to turn this off without turning off PagerDuty Advance.    Anyone have a sol

Hi there! We have an integration with pagerduty that uses Classic User oAuth. We currently pass the “read” scope. When I try to pass the “write” scope it doesn’t take it. I can create an app with Classic User oAuth manually in the UI but somehow not through the workflow. We use the github.com/PagerDuty/go-pagerduty library for this.It currently calls the following URL: https://app.pagerduty.com/oauth/authorize?client_id=XYZ&response_type=code&redirect_uri=https://abc.com/callback&state=ABC&access_type=offline&prompt=consent&scope=

Hello, I am interested in knowing does GitLab Changes Integration support  Deployment events, it does work with Merge request event out of the box, will it work with the Deployment events as well ?Thank you

I'm encountering an issue with the PagerDuty integration in ServiceNow and could use some help understanding the error and its causes.Context: In some cases, when a ServiceNow incident is created and we expect a linked PagerDuty ticket to be opened, the PagerDuty integration gives an error that appears in the work activity of the ServiceNow incident: "PagerDuty REST failed to trigger an incident: Service not found".In ServiceNow, teams (Assignment Groups) have associated Business Services where the team is listed as the Technical Support Group. These associated Business Services do not appear to be linked directly to PagerDuty and do not have corresponding PagerDuty services.It may be a coincidence, but it appears that the error occurs when a ServiceNow incident is created with a Business Service for which the Assignment Group is not the Technical Support Group in ServiceNow.Question: Can anyone explain what might be caus

Hi PagerDuty Community,I'm currently working on integrating ServiceNow with PagerDuty using the REST API. While testing the incident update (status change to "acknowledged") via Postman, I'm encountering the following error response:My API details and headers are correct. I used the same call from the PagerDuty REST Explorer; there, the integration is working fine.{ "error": { "errors": [ "Incident error illegitimate_requester_error" ], "code": 2001, "message": "Invalid Input Provided" } } 

Hello, I am testing a project of mine and I am suing events api v2 to send alerts and wondering if its possible to added images with preview to the alert through the api, Is this possible? if so, can I get some documentation on how to do it?

hi, in the free plan i enabled international calls it allowed to get 100 notification/month, pagerduty says for alot of time that my request under review so my question is ?is international notifications included in the free plan or it’s normal that the request takes alot of time?

Hi everyone. I am a fresh user of PagerDuty and so far I tested it with a checkmk integration and installed the app on my iphone. While in the browser everthing is clean and good looking, the one thing that really annoys me and cannot understand the logic behind designing it this way is how the notifications appear on the phone. It’s like “ALRT #12 #4354 #353 #4335346 #222  #43454 on xxxxx”. How on earth would one know what is going on without actually opening the app?! I would like to see the actual host name and a small brief of the issue, not incident numbers. I tested other solutions similar to PagerDuty, like iLert or SIGNL4, and none have this issue, you can clearly see what the alert is actually about without opening the app itself.Is this by design or can it be changed somehow?

Hi Experts, am upgrading my pagerduty provider from 1.9 to 3.5.2 and terraform from 0.12 to 0.13. When I run my terraform plan, i get this errorUnable to locate any vendor with the name: Google Cloud MonitoringI have tried with the following vendor names but still no luck data "pagerduty_vendor" "google_cloud_monitoring" {name = "Google Cloud Monitoring"}data "pagerduty_vendor" "stack_driver" {name = "Google Cloud Monitoring"}

How to automate sending incident updates to a bridge chat. Specifically, I want to run a command on an incident bridge that sends all status updates, notes, and actions taken on the incident to a Microsoft Teams bridge chat. I want this automation to apply to all incident bridges.

Hi,We got a scenario where a PagerDuty incident shouldn’t be triggered but a slack notification for the event should be sent. In the service orchestration rule we have a option to pause notifications , suppress alert but nothing matches our scenario. Any thoughts or help on this will be much appreciated.Thanks.,

I am interested in a report or list of all of my incident resolution notes, this will be used to train a new hire on the types of afterhours calls I get and how I resolved them so she can start taking call.  Is there anything available with the actual resolution notes on a list that I can pull (not ONE at a time, but like a report spreadsheet).  Any ideas or suggestions welcome. 

Can I send an email with teams conference link in incident workflows 

Hi everyone,I have a quick question that I couldn’t find in the community.In our company we used the Jira Server V3 extension, and now are planning to switch to the Jira Server V4 extension.Will we lose our current Jira configuration during the process ? How do we clean the old Jira version on Pager and Jira ? Currently we installed the two versions but only the old interface is accessible.  

Is there a way to enforce that a custom field is populated when resolving an incident?   Our current use case is to create a custom field for Categorization of the resolution.   However we don’t see anyway of enforcing that it gets updated.   Without enforcement then we are just running audit reports and chasing people down.   Not the best use of time.     If there was a way to enforce that the field gets updated, that would remove this concern.  

I would like to create a rotation schedule that is only active on alternate weeks.Week 1 : Person 1Week 2 : InactiveWeek 3 : Person 2Week 4 : InactiveI can easily create gaps inside of a week using restrictions, so this would be easy to do:1st Half of Week 1 : Person 12nd Half of Week 1: Inactive1st Half of Week 2: Person 22nd Half of Week 2: InactiveBut I cant figure out Week On, Week Off. Is there a way other than restrictions I’m missing?(I realize I could add a dummy account to fill in for the inactive weeks, I would prefer not to do that)

I’m not talking about the email integration, I’m using the Events API with a global orchestration and I’m not using AI Ops.The email notifications sent are a problem. In the app the “details” json is nicely displayed, but in emails the entire details field is crammed together in one text string.Can I fix this? PD is sending html emails, why can’t it format the details field nice like in the app?I have users that want to use email as their notification channel without using the app. The details section in the emails is practically unreadable.I can’t find any settings or docs about making the details section in emails look better.

In the configuration as code space, I’m building infra structure as code and configuration that will manage and control our config in PD (as much as possible).  The main driver is to manage the configuration of this critical piece of operations more securely and without the human-in-the-loop ClickOps via the PD portal.I’m running into trouble using the PagerDuty Terraform provider when you use it to create multiple  PD resources (users, services, schedules,etc) in bulk (i.e. using for-each in the terraform resource)We get failures back from the PD provider along the lines of:│ Error: Provider produced inconsistent result after apply││ When applying changes to│ pagerduty_user.service_users["<redacted>@<email>"], provider│ "provider[\"registry.terraform.io/pagerduty/pagerduty\"]" produced an│ unexpected new value: Root object was present, but now absent.││ This is a bug in the provider, which shou

Hi Community, We aren’t on the Enterprise Plan so looking for alternates. The ServiceNow integration V8 is installed and webhooks for auto/manual sync are working.I am experimenting with the Incident Workflow actions to trigger using the simple webhook post action to create an incident in ServiceNow.   What we want to do is be selective about which incidents to send to ServiceNow and created an Incident Workflow to only trigger when a P1 or P2 incident is created in Pagerduty. I have tried to use the exposed API endpoint on servicenow from the pagerduty integration “/api/x_pd_integration/pagerduty2sn” to force the triggering but not yet getting a good response.  Has anyone tried something like this ? Regards,Aron Campbell

Hi Everyone,We are currently working on enhancing our incident management automation by incorporating Mean Time To Resolve (MTTR) and Mean Time To Acknowledge (MTTA) metrics into our email reports via Python.Kindly suggest how we can  fetch the information of MTTA and MTTR through API

Hey everyone, I was just wondering if there's a way to set a customized notification sound for an alert with iOS 18 in the Pagerduty app itself.  The only options available are either the built-in notification sounds that Pagerduty offers, or choosing the “iOS Tones” folder - but this folder does not show the custom notification/ringtone sounds that I’ve setup in iOS itself.  There is also no way to change the app’s notification sounds from the iOS Settings app, I can only toggle sounds on or off as a blanket option.  Just wondering if this is possible or maybe on the roadmap for the future, as it seems like older versions of the app supported this (as does the Android app). In the first two screenshots, this is all we have to choose from - the stock Pagerduty sounds or the iOS tones folder.  In my third screenshot, iOS Settings app doesn't offer any options except sounds on or off.  In my last screenshot, I already have custom sounds working in iOS Settings, but they